Every audit, inspection and incident investigation ends with corrective actions. In most organisations, those actions then move into a spreadsheet, an email thread or a shared folder. A few weeks later, half are still open. Of the ones marked closed, few have any proof that the fix actually held.
Corrective and preventive action (CAPA) exists to stop problems from recurring. In practice, CAPA often stops at documentation. The finding is on record, but the behaviour on the warehouse floor has not changed.
For leadership, this is a governance issue. ISO 9001, ISO 45001, SMK3 audits in Indonesia and labour inspections in Saudi Arabia share one expectation. You must show that you identified a problem, fixed its cause and verified the result. A CAPA register full of overdue items tells an auditor, a client or a court the opposite.
What CAPA and supplier corrective action requests require
CAPA combines two disciplines. Corrective action removes the cause of a problem that has already occurred. Preventive action removes the cause of a problem that could occur. ISO 9001:2015 clause 10.2 requires organisations to react to nonconformities and evaluate the need to remove their causes. It also requires them to review whether the action worked.
A supplier corrective action request (SCAR) applies the same logic to an outside supplier or contractor. A typical SCAR process asks the supplier to correct the issue and document how they will prevent a repeat. On large sites, a SCAR often follows a contractor safety violation or a repeated non conformance report.
Whether the action is internal or external, auditors look for the same five things. They want a clear description, a root cause, an owner, a deadline and verified evidence of closure. Missing any one of them weakens the whole record.
How Core9 turns CAPA tracking into a closed loop
VISOR connects the detection of a problem to its correction and verification, using the cameras already installed on site.
Automatic event capture
VISOR reviews camera feeds continuously and detects safety and process deviations as they happen. Examples include PPE gaps, vehicles near pedestrians, blocked exits, spills and unsafe stacking. Each detection can open a corrective action case with a timestamp, a location and a video clip attached.
Your CAPA register stops depending on someone noticing a problem and remembering to log it. It reflects what actually happens on site, including on shifts that no auditor ever sees.
Ownership and deadlines
Every case receives an owner, a due date and a priority based on severity. The case goes to the right supervisor or contractor lead, and escalates when the deadline passes.
Leaders see open, overdue and closed actions by site, zone and contractor on one dashboard. Repeat findings become visible early, rather than surfacing in the next audit report.
Evidence attached to every case
Each case carries its own evidence trail: the original detection, the root cause notes, the action taken and the closure record. When an auditor or a client asks for proof, your team opens the case instead of searching shared drives.
Closure verified on camera
A corrective action is complete only when the fix holds. VISOR keeps monitoring the same zone after closure. If the same violation reappears, the new detection links back to the original case. The record then shows that the first action did not work, which is exactly what a management review needs to know.
Results
Automated detection and tracking reduce the manual effort behind CAPA as well as the risk. One enterprise operation cut its control tower team from 20 operators to 2 with no reduction in safety coverage. Operators stopped reviewing routine footage and focused on the cases that needed their judgement.
For audit teams, the change is practical. Every corrective action has a documented intervention behind it, and every closure has evidence attached.
QUESTIONS TO ASK YOUR LEADERSHIP TEAM
• How many corrective actions across our sites are past their due date today?
• Which findings have appeared in more than one audit cycle?
• When we close an action, who checks that the fix still holds a month later?
• How do we hold contractors to the same standard through supplier corrective action requests?
Bring evidence to every corrective action
CAPA works when every action has an owner, a deadline and proof that the fix held. VISOR applies that discipline on the cameras you already run, from first detection to verified closure.
To see how CAPA tracking would work across your sites and contractors, book a 15-minute call with Core9.
Frequently asked questions
What is the difference between corrective and preventive action?
Corrective action addresses the cause of a problem that has already happened. Preventive action addresses the cause of a potential problem before it occurs. ISO 9001:2015 now handles prevention through risk-based thinking across the whole system rather than in a separate clause.
What is a supplier corrective action request?
A supplier corrective action request (SCAR) is a formal request to a supplier or contractor. It asks them to investigate a nonconformity, fix its cause and show how they will prevent a repeat. It usually includes a response deadline.
What is a non conformance report?
A non conformance report records a failure to meet a requirement, such as a procedure, standard or specification. It often starts the CAPA process by describing what went wrong and where.
Does VISOR replace our existing EHS management system?
No. VISOR adds automated detection, evidence and verification to your current EHS management system. It feeds cases and records into the processes you already run.
See this against your own company’s data.

