Standards drift across shifts
PPE and procedure compliance varies between teams and night shifts, and spot checks see little of it.
Runs on CamCore
Night shift, held to day-shift rules.
Round-the-clock shifts, contractors, moving equipment. CamCore checks your rules on every line.
Live eventCamCore
Plant 1 · Line 3 · Press station
Guarded zoneEntered
MachineRunning
PPEGloves missing
RULENo entry to guarded zone while machine runs
- Line supervisor alerted
- Clip saved
Why now
The problems your operation already knows about.
None of these are new. What's new is being able to see them as they happen, on the equipment you already run.
Contractors and shutdowns
Maintenance shutdowns and contractor crews bring the highest-risk work with the least familiarity.
Audit evidence built by hand
Records are compiled before an audit or an ISO 45001 review, instead of captured as work happens.
353US manufacturing workplace deaths in 2024
2.5Mnonfatal workplace injuries and illnesses reported in the US in 2024
#1manufacturing had the largest share of severe forklift injuries
Use cases
What you can run from day one.
Pick a use case to see the alert your team would receive.
Live eventSample alert
Line 3 · Press station
ZoneGuarded
MachineRunning
- Line supervisor alerted
Live eventSample alert
Line 1 · Grinding
Eye protectionMissing
ShiftB
- Logged for shift report
Live eventSample alert
Boiler house
PermitNot issued
People2
- HSE lead alerted
Live eventSample alert
Finished goods · Bay 4
Distance1.9 m
ForkliftMoving
- Supervisor alerted
Live eventSample alert
Mixing room
HazardLiquid spill
NearWalkway
- Facilities team notified
Live eventSample alert
Line 2 · Seal check
StepSkipped
Batch2417
- Quality lead notified
Runs on 
See how CamCore works
See how CamCore works Compliance
Built for the rules you answer to.
Manufacturing teams across Saudi Arabia, the UAE, Oman, Pakistan and Indonesia work under specific obligations. CamCore gives you the evidence to show they are met.
MHRSD Occupational Safety & Health rules
Continuous PPE and hazard-zone checks, plus the summer midday outdoor work ban (12:00–15:00, 15 June–15 September), with a timestamped record for every event.
Ministerial Resolution No. 44 of 2022 on OSH
Evidence that PPE and safe-zone rules are enforced on every shift, and that the midday break (12:30–15:00, 15 June–15 September) is observed.
Ministerial Decision No. 286/2008 on OSH
Documented, continuous checks on PPE and restricted areas, and visibility of outdoor work during the summer midday ban.
Punjab OSH Act 2019 · Sindh OSH Act 2017
A searchable record of hazards, near-misses and corrective actions to support the risk assessments both Acts require.
SMK3 (PP No. 50/2012) · Law No. 1/1970
The documented, verifiable safety records SMK3 audits expect, captured as work happens instead of compiled before the audit.
ISO 45001
Continuous, timestamped evidence of hazard controls and corrective actions for ISO 45001 audits and certification reviews.
Summaries are for orientation and are not legal advice.How Core9 handles your data
Manufacturing · Pilot
Your pilot.
Prove guarding, PPE and forklift detection on one line or plant area, on your existing cameras, with evidence your HSE team and auditors will accept.
01Suggested scope
- Presses, robots and conveyors (guarded zones)
- Stations with specific PPE requirements
- Permit areas used during maintenance
- Where production meets storage (forklift proximity)
02What we set up
- Connection to the cameras already covering your lines
- Rules per station and zone, tied to shift patterns
- Alerts to line supervisors, with escalation to HSE
- Shift and line compliance scoring
03How we measure success
- Guarding and PPE events by line and shift
- Time from event to supervisor response
- Compliance gap between day and night shifts
- Audit-ready records for every event
No cost and no obligation to roll out. We set it up on what you already run.
Keep exploring
Tools and reading for manufacturing teams.
Self-serve tools and short reads, useful before you ever talk to us.
Toolkit
Safety & Efficiency ROI Calculator
Estimate the value of fewer incidents and less manual monitoring.
Open the tool ToolkitPilot Planner
Scope cameras, zones and use cases for a first plant pilot.
Open the tool Insight · 7 min readWorkplace safety management: the complete guide
Build a programme that works before an incident, not after.
Read the insight Insight · 5 min readWhy most safety programmes fail before an incident happens
The gap between the policy and the floor.
Read the insight FAQs
Questions manufacturing teams ask.
Still curious? We'll walk you through it on a short call.
Yes. Every rule can be scheduled, so a zone that is open during maintenance can be enforced during production.
CamCore gives you continuous, timestamped evidence of hazard controls and corrective actions — the kind of records ISO 45001 audits ask for.
Yes. Critical steps at key stations can be checked, and skipped or out-of-sequence steps flagged to the quality lead.
We review camera views before the pilot and tell you which are usable for each rule. Some areas may need a camera moved or added.
Other industries
One intelligence layer, across the supply chain.
Book a demo
Deployed in weeks. Resident in-country.
Start with a pilot on the cameras you already own, and grow it across your operation.